run show dhcp server binding address


The run show dhcp server binding address command shows the allocated IP address binding information.


Command Syntax

run show dhcp server binding [vrf <vrf-name>] [address <ipv4-address>]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The command shows the allocated IP address binding information in the default VRF if not explicitly specify a VRF name.

address <ipv4-address>

Optional. Specifies an allocated address. The value is in dotted decimal notation.


Example

  • View the allocated IP address binding information.
admin@Xorplus# run show dhcp server binding
2 bound clients
           
IP address      MAC address          Server      Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1    vlan100
10.1.1.88       00:0a:12:00:12:34    10.1.1.1    vlan100

admin@Xorplus# run show dhcp server binding vrf vrf1
1 bound clients

IP address      MAC address          Server     Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1   vlan100

admin@Xorplus# run show dhcp server binding address 10.1.1.89
IP address      MAC address          Server     Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1   vlan100

admin@Xorplus# run show dhcp server binding vrf vrf1 address 10.1.1.89
IP address      MAC address          Server     Interface
10.1.1.89       00:0a:12:00:12:12    10.1.1.1   vlan100

In the show result, "Server" represents the IP address of the Layer 3 VLAN interface connected to the DHCP client.



Copyright © 2024 Pica8 Inc. All Rights Reserved.