set protocols dhcp snooping binding file
The set protocols dhcp snooping binding file command configures a DHCP snooping binding file for synchronizing DHCP snooping entries from memory.
Command Syntax
set protocols dhcp snooping binding file <file-path>
Parameters
Parameter | Description |
file <file-path> | Specifies a file path to save the DHCP snooping binding table. |
Usage Guidelines
If a DHCP snooping binding file is specified, the DHCP snooping entries will be synchronized from the memory to the binding file. This prevents DHCP snooping entries data loss in case of power failure. By setting a DHCP snooping binding file, the system can directly load the existing snooping entries from the binding file after if recovers.
Example
- Configure the DHCP snooping binding file.
admin@Xorplus# set protocols dhcp snooping binding file /tmp/run/dhcp_bind admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.