run show dhcp snooping binding
The run show dhcp snooping binding command displays the DHCP snooping binding table, which includes the user MAC address, IP address, VLAN ID, access interface and the lease time.
Command Syntax
run show dhcp snooping binding
Parameter
None.
Example
- Show the DHCP snooping binding table.
admin@Xorplus# run show dhcp snooping binding Total count:    2 MAC Address     IP Address    Port           VLAN ID  Lease(sec)                 -------------------------------------------------------------------------------------------- e4:f0:04:89:b6:46  0.0.0.0        ae65           1        0/0                                              14:18:77:18:2c:b9  100.1.1.1      ae25           125      599/600
Table 1. Description of the run show dhcp snooping binding command output
Item | Description |
Mac Address | User MAC address. |
IP Address | User IP address. |
Port | User access interface. |
VLAN ID | User VLAN ID. |
Lease(sec) | Lease time for the IP address, in seconds. The format displayed is Remaining Lease Time/Total Lease Time. |
Copyright © 2024 Pica8 Inc. All Rights Reserved.