set protocols bgp neighbor disable-connected-check
The set protocols bgp neighbor disable-connected-check command allows peerings between directly connected eBGP peers using loopback addresses.
The delete protocols bgp neighbor disable-connected-check command doesn't allow peerings between directly connected eBGP peers using loopback addresses.
Command Syntax
set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> | interface <interface>} disable-connected-check
delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> | interface <interface>} disable-connected-check
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
neighbor <ip> | Specifies the IPv4/IPv6 address of a peer. |
peer-group <peer-group> | Specifies a peer group. |
interface <interface> | Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name. |
Example
• This example allows peerings between directly connected eBGP peers using loopback addresses.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 disable-connected-check admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.