set protocols bgp peer-group
The set protocols bgp peer-group command creates a peer group.
The delete protocols bgp peer-group command deletes a peer group.
Command Syntax
set protocols bgp [vrf <vrf-name>] peer-group <peer-group>
delete protocols bgp [vrf <vrf-name>] peer-group <peer-group>
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
peer-group <peer-group> | Specifies a name of peer group. |
Usage Guidelines
Instead of specifying properties of each individual peer, you can define one or more peer groups and associate all the attributes common to that peer session to a peer group. A peer needs to be attached to a peer group only once, when it then inherits all address families activated for that peer group.
Note:
If the peer you want to add to a group already exists in the BGP configuration, delete it first, than add it to the peer group.
Example
• This example creates a peer group.
admin@XorPlus# set protocols bgp peer-group leaf1 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.