set protocols ospf area virtual-link

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set protocols ospf area virtual-link command creates an OSPF virtual link with a remote ABR and enters the vlink context.

The delete protocols ospf area virtual-link command deletes an OSPF virtual link with the specified router ID of the remote ABR. If no <ROUTER-ID> is specified, the command sets the virtual link to the default settings.


Command Syntax

set protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID>


Parameters

Parameter

Description

vrf <vrf-name>

Optional. Specifies the name of the VRF for the OSPF instance.

area {<ipv4>|<area-id>}

Specifies the OSPF area ID. The value could be in IPv4 dotted decimal format or an integer that ranges from 0 to 4294967295.

virtual-link <ROUTER-ID>

Configures a virtual link with the specified router ID of the remote ABR.


Example

  • Configuring OSPF virtual links:
admin@Xorplus# set protocols ospf area 1 virtual-link 100.0.1.1
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.