set protocols ospf area virtual-link hello-interval

Run the command set protocols ospf area virtual-link hello-interval to set the OSPF hello interval on the virtual link. Hello packets will be sent every hello-interval of time. The default value is 10 seconds.

Run the command delete protocols ospf area virtual-link hello-interval to remove this configuration and revert back to the default 10 seconds.


Command Syntax

set protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> hello-interval <seconds>

delete protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> hello-interval <seconds>


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies the name of the VRF for the OSPF instance.

area {<ipv4>|<area-id>}Specifies the OSPF area ID. The value could be IPv4 dotted decimal format or an integer that ranges from 0 to 4294967295.

virtual-link <ROUTER-ID>

Configures a virtual link with the specified router ID of the remote ABR.

hello-interval <seconds>Specifies the hello interval in seconds.  The value ranges from 1 to 65535. The default value is 10 seconds.


Example

  •  Configure the hello interval to 60 seconds on the virtual link.
admin@XorPlus# set protocols ospf area 1.1.1.1 virtual-link 100.0.1.1 hello-interval 60
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.