set protocols ospf router-id
Run the command set protocols ospf router-id to configure OSPF router ID. The router ID should be unique within the OSPF domain and is in the IPv4 dotted decimal format. Optional parameter instance-id can be included to specify the OSPFv2 multi-instance ID. The optional parameter vrf can be used to specify OSFPv2 instance for a particular VRF. If VRF is not defined then OSPFv2 instance takes effect for the default VRF.
Multiple instances of OSPF are only allowed in the default VRF. A maximum of 8 instance can be configured in the default VRF. In non-default VRFs, only single instance OSPF can be configured.
Run the command delete protocols ospf route-id to delete this configuration.
Command Syntax
set protocols ospf [instance-id <instance-id> |Â vrf <vrf-name>] router-id <ipv4>
delete protocols ospf [instance-id <instance-id>|Â vrf <vrf-name>] router-id <ipv4>
Parameter
Parameter | Description |
instance-id <instance-id> | Optional, specifies the OSPF instance ID. The value is an integer that ranges from 1 to 8. |
vrf <vrf-name> | Optional. Specifies the name of the VRF for the OSPF instance. |
router-id <ipv4> | Specify OSPF router ID. The value is in IPv4 dotted decimal format. |
Example
- Â Configure OSPF router ID for OSPF instance ID 1.
admin@XorPlus# set protocols ospf instance-id 1 router-id 1.1.1.1 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.