run show vrrp
The run show vrrp command displays the configuration information of VRRP group.
NOTE: This command applies to both VRRPv2 and VRRPv3 configuration. |
Command Syntax
run show vrrp <interface-name>
Parameter
Parameter | Description |
<interface-name> | Optional. Specifies the Layer 3 interface name of VRRP device. The value is a string. |
Example
- Run run show vrrp command to view the configuration information of VRRP group.
admin@XorPlus# run show vrrp vlan100 Interface: vlan100 VRID: 1 Version: 3 Accept: disable Load-balance: enable State: Master Master IP: 192.168.1.1 Virtual MAC: 00:00:5e:00:01:01 Preempt: enable Adver Interval: 4 Priority: 250 Virtual IP: 192.168.1.5 Auth-type: simple Auth-key: 123456
Copyright © 2024 Pica8 Inc. All Rights Reserved.