set protocols vrrp interface vrid ipv6-nd router-preference
The set protocols vrrp interface vrid ipv6-nd router-preference command specifies the value that is set in the Default Router Preference (DRP) field of Router Advertisements (RAs) that the switch sends from an interface. An interface with a DRP value of high will be preferred by other devices on the network over interfaces with an RA value of medium or low.
The delete protocols vrrp interface vrid ipv6-nd router-preference command restores the default configuration.
Command Syntax
set protocols vrrp interface <interface-name> vrid <virtual-router-id> ipv6-nd router-preference <high | medium | low>
Parameter
Parameter | Description |
interface <interface-name> | Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string. |
vrid <virtual-router-id> | Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254. |
router-preference <high | medium | low> | Specifies the value that is set in the Default Router Preference (DRP) field.
|
Example
- Configure the value that is set in the Default Router Preference (DRP) field of Router Advertisements (RAs).
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 ipv6-nd router-preference high admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.