set protocols vrrp interface vrid ipv6-nd other-config-flag
The set protocols vrrp interface vrid ipv6-nd other-config-flag command sets the flag in IPv6 router advertisements which indicates to hosts that they should use DHCPv6 protocol to obtain autoconfiguration information other than addresses. Default: not set.
The delete protocols vrrp interface vrid ipv6-nd other-config-flag command restores the default configuration.
Command Syntax
set protocols vrrp interface <interface-name> vrid <virtual-router-id> ipv6-nd other-config-flag
Parameter
Parameter | Description |
interface <interface-name> | Specifies the Layer 3 interface name of VRRP device. The value could be the VLAN interface name, the routed interface or the sub-interface name. The value is a string. |
vrid <virtual-router-id> | Specifies the VRID of a VRRP group. The value is an integer that ranges from 1 to 254. |
Example
- Configure the flag in IPv6 router advertisements which indicates to hosts that they should use DHCPv6 protocol to obtain autoconfiguration information other than addresses.
admin@Xorplus# set protocols vrrp interface vlan100 vrid 2 ipv6-nd other-config-flag admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.