The set protocols mvrp edge-switch command can be used to enable or disable MVRP edge-switch function.

The delete protocols mvrp edge-switch command deletes the configuration.

NOTE:

This command can be enabled only on the edge switches.

Command Syntax

set protocols mvrp edge-switch <true | false>

Parameters

Parameter

Description

<true | false>

Enable or disable MVRP edge-switch function. The value could be true or false.

By default, MVRP edge-switch function is disabled.

Example

admin@PICOS# set protocols mvrp edge-switch true
admin@PICOS# commit

Browser not supported