set protocols bgp peer-group

The set protocols bgp peer-group command creates a peer group.
The delete protocols bgp peer-group command deletes a peer group.

Command Syntax

set protocols bgp [vrf <vrf-name>] peer-group <peer-group>

delete protocols bgp [vrf <vrf-name>] peer-group <peer-group>

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
peer-group <peer-group>	Specifies a name of peer group.

Usage Guidelines

Instead of specifying properties of each individual peer, you can define one or more peer groups and associate all the attributes common to that peer session to a peer group. A peer needs to be attached to a peer group only once, when it then inherits all address families activated for that peer group.

Note:

If the peer you want to add to a group already exists in the BGP configuration, delete it first, than add it to the peer group.

Example
• This example creates a peer group.

admin@XorPlus# set protocols bgp peer-group leaf1
admin@XorPlus# commit