run show system ntp-status

The run show system ntp-status command displays information about the switch NTP status.

Command Syntax
run show system ntp-status

Example
• This example demonstrates how to show system ntp-status:

admin@XorPlus# run show system ntp-status 
NTP Server information:
server 192.168.10.100
NTP Server Sync information:
ntp_gettime() returns code 0 (OK)
  time d709f74e.9b523000  Tue, Apr 29 2014 10:02:54.606, (.606723),
  maximum error 6016 us, estimated error 16 us, TAI offset 0
ntp_adjtime() returns code 0 (OK)
  modes 0x0 (),
  offset 0.000 us, frequency 0.000 ppm, interval 1 s,
  maximum error 6016 us, estimated error 16 us,
  status 0x1 (PLL),
  time constant 7, precision 1.000 us, tolerance 500 ppm,
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 192.168.10.100  .INIT.          16 u    -   64    0    0.000    0.000   0.000