set system inband enable

Owned by Tracy Yang
May 24, 2024
1 min read

Warning:

The command set system inband enable true is obsolete and replaced by command set system inband vlan-interface <vlan-interface>, set system inband loopback <loopback-interface>, set system inband routed-interface <routed-interface>.

The set system inband enable command is used to enable or disable the inband management function for all the L3 interfaces in the default VRF.


Command Syntax

set system inband enable <true | false>


Parameter

Parameter

Description

enable <true | false>

Enables or disables the inband management function for all the L3 interfaces in the default VRF. The value could be true or false.

  •    true: enables the inband management function for all the L3 interfaces in the default VRF.
  •    false: disables the inband management function for all the L3 interfaces in the default VRF.

By default, inband management function is disabled.


Example

  •   Enable the inband management function for all the L3 interfaces in the default VRF.
admin@XorPlus# set system inband enable true
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.