set system services telnet disable

The set system services telnet disable command can be used to enable or disable the telnet service function. The Pica8 switch supports functioning as a telnet server. To enable the telnet server function, users can enable the telnet service by using this command.

The delete system services telnet disable command deletes the configuration.

NOTEs:

  • Users need to enable telnet service to enable telnet server function on the device.

  • Telnet service is insecure. Do not enable a telnet server if you don't know what exactly it may mean.

  • Limit to a maximum of 20 connections within 10 seconds.

  • Terminate the session in 60 seconds if the connection is not successful.

 

Command Syntax

set system services telnet disable <true | false>

delete system services telnet disable

 

Parameter

Parameter

Description

enable <true | false>

Enable or disable telnet service. The value could be true or false.

  • true: Enable telnet service.

  • false: Disable telnet service.

By default, telnet service is disabled.

 

Example

  • Enable telnet service.

admin@PICOS# set system services telnet disable false admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.