show system management-ethernet

The show system management-ethernet command shows the configuration information, status and traffic statistics information of the management interface.

Command Syntax

show system management-ethernet

Parameter

None.

Example

• Run run show system management-ethernet command to view the configuration information, status and traffic statistics information of the management interface.

  admin@Xorplus# run show system management-ethernet 
  eth0    Hwaddr: 68:21:5f:7f:10:c5       State: UP
          Gateway  : 192.168.10.1
          Inet addr: 
                     192.168.10.5/24
                     fe80::6a21:5fff:fe7f:10c5/64
      Traffic statistics
          Input Packets......................222156
          Input Bytes........................13775674
          Output Packets.....................1471
          Output Bytes.......................140558
  
  eth1    Hwaddr: 68:21:5f:7f:10:c9       State: UP
          Inet addr: 
                     fe80::6a21:5fff:fe7f:10c9/64
      Traffic statistics
          Input Packets......................0
          Input Bytes........................0
          Output Packets.....................63
          Output Bytes.......................4546