set system services telnet disable

The set system services telnet disable command can be used to enable or disable the telnet service function. The Pica8 switch supports functioning as a telnet server. To enable the telnet server function, users can enable the telnet service by using this command.

The delete system services telnet disable command deletes the configuration.

NOTEs:

Users need to enable telnet service to enable telnet server function on the device.
Telnet service is insecure. Do not enable a telnet server if you don't know what exactly it may mean.
Limit to a maximum of 20 connections within 10 seconds.
Terminate the session in 60 seconds if the connection is not successful.

Command Syntax

set system services telnet disable <true | false>

delete system services telnet disable

Parameter

Parameter

Description

enable <true | false>

Enable or disable telnet service. The value could be true or false.

true: Enable telnet service.
false: Disable telnet service.

By default, telnet service is disabled.

Example

Enable telnet service.

admin@PICOS# set system services telnet disable false
admin@PICOS# commit