run show msdp peer
- Tracy Yang
Owned by Tracy Yang
May 24, 2024
1 min read
Loading data...
The run show msdp peer command displays the status information of the MSDP peers.
Note: Use this command only on MSDP peers.
Command Syntax
run show msdp peer [<peer-ip> | detail]
Parameter
Parameter | Description |
<peer-ip> | Optional. Specifies the address of a remote MSDP peer. If this parameter is not specified, information about all the MSDP peers will be displayed. The address is in dotted decimal notation. |
detail | Optional. Displays detail information about the status of MSDP peers. |
Example
- View the brief information about all the remote MSDP peers.
admin@Xorplus# run show msdp peer Peer                      Local       State   Uptime  SaCnt 3.3.3.3                 2.2.2.2 established 06:10:45      2
- View the detail information about all the remote MSDP peers.
admin@Xorplus# run show msdp peer detail Peer : 3.3.3.3  Local              : 2.2.2.2  Mesh Group         : 6.6.6.6  State              : established  Uptime             : 06:10:52  Keepalive Timer    : 00:00:08  Conn Retry Timer   : --:--:--  Hold Timer         : 00:00:46  Last Reset         : -  Conn Attempts      : 22  Established Changes : 1  SA Count           : 2  Statistics         :                       Sent      Rcvd    Keepalives :       371         4    SAs       :         0       748
- View the detail information about a specific remote MSDP peer.
admin@Xorplus# run show msdp peer 3.3.3.3 Peer : 3.3.3.3  Local              : 2.2.2.2  Mesh Group         : 6.6.6.6  State              : established  Uptime             : 06:11:03  Keepalive Timer    : 00:00:57  Conn Retry Timer   : --:--:--  Hold Timer         : 00:00:35  Last Reset         : -  Conn Attempts      : 22  Established Changes : 1  SA Count           : 2  Statistics         :                       Sent      Rcvd    Keepalives :       372         4    SAs       :         0       748
Copyright © 2024 Pica8 Inc. All Rights Reserved.