set poe power mode
The set poe power mode command configures PoE power mode to aggressive or redundant.
Command Syntax
set poe power mode <aggressive | redundant>
Parameter
Parameter | Description |
mode <aggressive | redundant> | For details about the maximum power values supported by each PoE supported platform for the two PoE power modes, see Table 1. |
Usage Guidelines
The maximum power value on S5810-48TS-P and S5860-24XB-U does not distinguish between high and low voltages, the maximum power value is 1500 Watts in aggressive mode and 750 Watts in redundant mode.
The maximum power value on S5860-24MG-U does not distinguish between high and low voltages, the maximum power value is 648 Watts in aggressive mode and 324 Watts in redundant mode.
The maximum power value on S5860-48XMG-U/S5860-48MG-U does not distinguish between high and low voltages, the maximum power value is 765 Watts in aggressive mode and 382.5 Watts in redundant mode.
Table 1. The maximum power values supported by each PoE supported platform
Power Mode | High Voltage(Voltage>120V) | Low Voltage(Voltage<120V) | ||
Aggressive (Watts) | Redundant (Watts) | Aggressive (Watts) | Redundant (Watts) | |
N3248PXE-ON | 2496 | 1056 | 1261 | 406 |
N3248P-ON | 1758 | 813 | 1568 | 713 |
N3208PX-ON | 493 | 193 | 493 | 193 |
N3224PX-ON | 2700 | 1260 | 1465 | 610 |
N3224P-ON | 1771 | 826 | 1581 | 726 |
AS4610_54P | 1500 | 750 | 800 | 400 |
AS4610_30P | 1500 | 750 | 800 | 400 |
AS4630-54PE | 1800 | 900 | 1000 | 500 |
AS4630-54NPE | 1800 | 900 | 1000 | 500 |
N2248PX-ON | 2714 | 1274 | 1479 | 624 |
N2224PX-ON | 1757 | 812 | 1567 | 712 |
N3224P-ON | 1771 | 826 | 1581 | 726 |
AS4625-54P | 2025 | 945 | 1665 | 765 |
Example
- Configure power mode to aggressive.
admin@XorPlus# set poe power mode aggressive admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.