set protocols mlag domain node
The set protocols mlag domain node command specifies the node ID for the MLAG device.
Command Syntax
set protocols mlag domain <domain-id> node <0 | 1>
Parameters
Parameter | Description |
domain <domain-id> | Specifies a domain ID. The value is an integer that ranges from 1 to 255. |
node <0 | 1> | Specifies the node ID for the MLAG device. The value could be 0 or 1. |
Example
- Set the node ID for the MLAG device as 0.
admin@Xorplus# set protocols mlag domain 3 node 0
Copyright © 2024 Pica8 Inc. All Rights Reserved.