Run the command set l3-interface tunnel destination to configure the GRE tunnel destination IPv4 address.

Run the command delete l3-interface tunnel destination to delete this configuration.

Command Syntax

set l3-interface tunnel <tunnel-name> destination <IPv4-address>

delete l3-interface tunnel <tunnel-name> destination <IPv4-address>

Parameter

Parameter	Description
tunnel <tunnel-name>	Specifies the name of the tunnel, its value is alpha-numeric with no spaces.
destination <IPv4-address>	Specifies the GRE tunnel destination IP address in IPv4 format.

Example

admin@XorPlus# set l3-interface tunnel tnl4 destination 1.1.1.1
admin@Xorplus# commit

Browser not supported