run clear gvrp interface statistics

Owned by Tracy Yang
May 24, 2024
1 min read

The run clear gvrp interface statistics command is used to clear the GVRP packets statistics.

NOTE:

The previous statistics cannot be restored after clearing, so be careful when using this command.


Command Syntax

run clear gvrp interface <interface-name> statistics


Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name that enabled GVRP. The value could be a physical interface or a LAG interface.


Example

  • Clear the statistics information of GVRP.
admin@PICOS# run clear gvrp interface te-1/1/7 statistics
admin@PICOS# run show gvrp interface te-1/1/7 statistics
packet_received: 0
packet_sent:    0




Copyright © 2024 Pica8 Inc. All Rights Reserved.