run show vrf

Owned by Tracy Yang
May 24, 2024
1 min read

The run show vrf command is used to view the binding information between the VRFs and the Layer 3 interfaces.


Command Syntax

run show vrf


Parameter

None.


Example

•  View the binding information between the VRFs and the Layer 3 interfaces. 

admin@Xorplus# run show vrf
Vrf          Description       Interfaces
----------   ---------------   -------------------------
vrf1                           vlan1,vlan2
vrf10                          vlan19,vlan20
vrf100                         vlan199,vlan200
vrf101                         vlan201,vlan202
vrf200                         r1.1,r2

Copyright © 2024 Pica8 Inc. All Rights Reserved.