set protocols ospf6 graceful-restart grace-period
Run the command set protocols ospf6 graceful-restart grace-period to configure the maximum restart wait time. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF.
Optional parameter instance-id can be included to specify the OSPFv3 multi-instance ID in the default VRF.
Multiple instances of OSPFv3 are only allowed in the default VRF. A maximum of 8 instance can be configured in the default VRF. In non-default VRFs, only single instance OSPF can be configured.
The command delete protocols ospf6 graceful-restart grace-period can be used to remove this configuration.
Command Syntax
set protocols ospf6 [instance-id <instance-id>] [vrf<vrf-name>] grace-period <grace-period>Â
delete protocols ospf6 [instance-id <instance-id>] [vrf <vrf-name>]Â grace-period
Parameter
Parameter | Description |
instance-id <instance-id> | Optional, specifies the OSPF instance ID. The value is an integer that ranges from 1 to 8. |
vrf <vrf-name> | Optional. Specifies the name of the VRF for the OSPF instance. |
grace-period <grace-period> | Specifies the maximum restart wait time, in seconds, advertised to neighbors. The value is an integer that ranges from 1 through 1800 seconds. The default value is 120 seconds. |
Example
-  Configure the maximum restart wait time.
admin@PICOS# set protocols ospf6 instance-id 1 grace-period 300 admin@PICOS# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.