run show isis neighbor

The run show isis neighbor command displays IS-IS neighbor information.

Command Syntax

run show isis [vrf <text> | vrf all] neighbor [a-neighbor<text>][detail] [json]

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name.
a-neighbor<text>	Specifies the system ID of an IS-IS neighbor.

Example

View IS-IS neighbor information.

admin@PICOS# run show isis neighbor
Area 1:
  System Id           Interface   L  State        Holdtime SNPA
  PICOS               vlan100     1  Up            27       8cea.1b4b.7821
  PICOS               vlan100     2  Up            28       8cea.1b4b.7821



admin@PICOS# run show isis neighbor a-neighbor PICOS
Area 1:
 PICOS
    Interface: vlan100, Level: 1, State: Up, Expires in 28s
    Adjacency flaps: 1, Last: 3m34s ago
    Circuit type: L1L2, Speaks: IPv4, IPv6
    SNPA: 8cea.1b4b.7821, LAN id: PICOS.b1
    LAN Priority: 64, is DIS, DIS flaps: 1, Last: 3m34s ago
    Area Address(es):
      49.0001
    IPv4 Address(es):
      1.1.1.2
    IPv6 Address(es):
      fe80::8eea:1b10:14b:7821
    Global IPv6 Address(es):
      1000::2

 PICOS
    Interface: vlan100, Level: 2, State: Up, Expires in 29s
    Adjacency flaps: 1, Last: 3m35s ago
    Circuit type: L1L2, Speaks: IPv4, IPv6
    SNPA: 8cea.1b4b.7821, LAN id: PICOS.b1
    LAN Priority: 64, is DIS, DIS flaps: 1, Last: 3m35s ago
    Area Address(es):
      49.0001
    IPv4 Address(es):
      1.1.1.2
    IPv6 Address(es):
      fe80::8eea:1b10:14b:7821
    Global IPv6 Address(es):
      1000::2