/
show system management-ethernet
show system management-ethernet
The show system management-ethernet command shows the configuration information, status and traffic statistics information of the management interface.
Command Syntax
show system management-ethernet
Parameter
None.
Example
Run run show system management-ethernet command to view the configuration information, status and traffic statistics information of the management interface.
admin@Xorplus# run show system management-ethernet eth0 Hwaddr: 68:21:5f:7f:10:c5 State: UP Gateway : 192.168.10.1 Inet addr: 192.168.10.5/24 fe80::6a21:5fff:fe7f:10c5/64 Traffic statistics Input Packets......................222156 Input Bytes........................13775674 Output Packets.....................1471 Output Bytes.......................140558 eth1 Hwaddr: 68:21:5f:7f:10:c9 State: UP Inet addr: fe80::6a21:5fff:fe7f:10c9/64 Traffic statistics Input Packets......................0 Input Bytes........................0 Output Packets.....................63 Output Bytes.......................4546
, multiple selections available,
Related content
show system management-ethernet
show system management-ethernet
More like this
show system management-ethernet
show system management-ethernet
More like this
show system management-ethernet
show system management-ethernet
More like this
show interface detail
show interface detail
More like this
show interface detail
show interface detail
More like this
show interface detail
show interface detail
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.