PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.5_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
Release Notes for PICOS 4.4.5
Hardware Guides
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
VLAN Configuration Commands
Voice VLAN Configuration Commands
Layer 3 Routing Commands
ACL Configuration Commands
QoS Configuration Commands
class-of-service classifier <classifier-name>
class-of-service classifier <classifier-name> forwarding-class <forwarding-class-name> code-point <code-point>
class-of-service classifier <classifier-name> trust-mode <trust-mode>
class-of-service forwarding-class <forwarding-class-name> local-priority <local-priority>
class-of-service interface <port> classifier <classifier-name>
class-of-service scheduler <scheduler-name> guaranteed-rate <guaranteed-rate>
class-of-service scheduler <scheduler-name> mode SP
class-of-service scheduler <scheduler-name> mode WFQ
class-of-service scheduler <scheduler-name> mode WRR
class-of-service scheduler <scheduler-name> weight <weight-id>
class-of-service scheduler-profile <scheduler-profile-name> forwarding-class <forwarding-class-name> schedule <schedule-name>
show class-of-service <text>
set class-of-service interface scheduler-profile
class-of-service interface <port> default-priority <default-priority-type> <default-priority-int>
class-of-service pfc-profile <profile-name> code-point <code-point> drop <boolean>
class-of-service interface <port> pfc-profile <profile-name>
set firewall filter sequence then dscp
set class-of-service scheduler max-rate
CoPP Commands
Buffer Management Commands
Interface-based Rate Limiting Commands
ACL-based Traffic Policer Commands
set firewall policer if-exceeding count-mode
set firewall policer if-exceeding rate-limit
set firewall policer if-exceeding burst-limit
set firewall policer if-exceeding action discard
set firewall filter sequence then policer
run show policer
PFC Watchdog
Protocol Configuration Commands
IP Multicast Commands
OpenFlow Commands in CrossFlow Mode
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
GVRP Commands
MVRP Commands
ERPS Commands
EFM OAM Commands
Loopback Detection Commands
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
You‘re viewing this with anonymous access, so some content might be blocked.
Close
PICOS-4.4.5_Configuration_Guide
/
ACL-based Traffic Policer Commands
ACL-based Traffic Policer Commands
Tracy Yang
Owned by
Tracy Yang
Jul 18, 2024
Loading data...
set firewall policer if-exceeding count-mode
set firewall policer if-exceeding rate-limit
set firewall policer if-exceeding burst-limit
set firewall policer if-exceeding action discard
set firewall filter sequence then policer
run show policer
Related content
Info icon
Collapse
ACL-based Traffic Policer
ACL-based Traffic Policer
PICOS-4.4.4_Configuration_Guide (Special Release)
More like this
ACL-based Traffic Policer
ACL-based Traffic Policer
PICOS-4.4.4_Configuration_Guide
More like this
ACL-based Traffic Policer
ACL-based Traffic Policer
PICOS-4.0_Configuration_Guide
More like this
ACL-based Traffic Policer
ACL-based Traffic Policer
PICOS-4.1.3_Configuration_Guide
More like this
ACL-based Traffic Policer
ACL-based Traffic Policer
PICOS-4.4.0_Configuration_Guide
More like this
ACL-based Traffic Policer
ACL-based Traffic Policer
PICOS-3.8_Configuration_Guide
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.
{"serverDuration": 15, "requestCorrelationId": "2db1c6812eb64ad8a09815c9ac377d98"}