set protocols igmp interface

Owned by Tracy Yang
Jul 18, 2024
1 min read

The set protocols igmp interface command enables IGMP on an L3 interface.


Command Syntax
set protocols igmp interface <interface-name>
delete protocols igmp interface <interface-name>


Parameter

ParameterDescription
interface <interface-name>Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name. The value is a string.


Usage Guidelines

On a shared network segment, user hosts and Layer 3 multicast devices directly connected to the user network segment must run IGMP. A multicast device can process IGMP messages sent from user hosts only after IGMP is enabled on the interfaces connected to user network segments.


Example
• This example enables IGMP on vlan2:

admin@XorPlus# set protocols igmp interface vlan2
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.