run clear loopback-detection interface

The run clear loopback-detection interface command is used to clear the err-disable state of the loopback detection interface.

Command Syntax

run clear loopback-detection interface {<interface-name> | all}

Parameter

Parameter	Description
interface {<interface-name> \| all}	Specifies the interface name. The value is a physical interface or an LAG interface. If all is specified, clear the err-disable state for all the loopback detection interfaces.

Example

admin@PICOS# run clear loopback-detection interface xe-1/1/1
Clear xe-1/1/1 err-disable state