set protocols neighbour inspection trust-port

Owned by shengxiuhua (Unlicensed)
Last updated: Oct 10, 2024
1 min read

The set protocols neighbour inspection trust-port command can be used to configure ND inspection trust port.

The delete protocols neighbour inspection trust-port command deletes the configuration.

 

Command Syntax

set protocols neighbour inspection trust-port <port>

delete protocols neighbour inspection trust-port <port>

 

Parameters

Parameter

Description

trust-port <port>

Specifies the trust port. The value could be a physical port or LAG port. The value is like ge-1/1/1, te-1/1/3, ae1, etc.

NOTE:

The device does not configure trust ports by default.

 

Usage Guidelines

This feature specifies the trust port, after specified, the device does not check ND message on that port and forwards the message.

 

Example

  • Configure a ND inspection trust-port ge-1/1/1.

admin@PICOS# set protocols neighbour inspection trust-port ge-1/1/1 admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.