S5810-28TS

Front Panel Schematic

(1) Status LED	(2) PWR1 LED	(3) PWR2 LED
(4) MGMT LED	(5) RJ45 Management port	(6) Console port
(7) Mini Console port	(8) USB port	(9) GE RJ45 port
(10) GE SFP port (Combo)	(11) 10GE SFP+ port	-

Rear Panel Schematic

(1) PS1 (Power Supply)

(2) PS2

-

Switch System Characteristics

Mechanical dimension (WxDxH)	440 X 280 X 44mm
RJ45 Management port	1
Console port	1
10/100/1000BASE-T RJ45 port	28
10/100/1000BASE-T RJ45 port LED	28 x 1
GE SFP port (Combo)	4
GE SFP port LED	4 x 1
10G SFP+ port	4
10G SFP+ LED	4 x 1
Status LED	1
PWR1 LED	1
PWR2 LED	1
MGMT LED	1
Mini Console port	1
USB port	1
Power Supply	1+1
FAN	3 x Built-in Fans
Working environment temperature	32°F to 122°F (0ºC to 50ºC)

NOTE

Combo Port

Ge-1/1/25, Ge-1/1/26, Ge-1/1/27 and Ge-1/1/28 ports are combo ports that support 1G port speed. A combo port consists of a GE electrical interface and a GE optical interface separately on the front panel. The multiplexed electrical and optical interfaces share one internal forwarding interface and cannot work at the same time. When one interface works, the other interface is disabled.

The electrical port has a higher priority, that is, as long as the electrical port is plugged in, the electrical port takes effect but the optical port is invalid.

When configuring port speed, the combo ports (when worked as electrical ports) only support auto-negotiation mode, that is, configuring the force rate will not take effect for combo port when it works as an electrical port.