set vlans dot1q-tunneling egress then action

To configure tunneling for egress traffic, use the set vlans dot1q-tunneling egress then action command in L2/L3 configuration mode. If a packet can pass through the port, it needs to be modified by the action.

Command Syntax

set vlans dot1q-tunneling egress tunnel-id then action { change | none | one | two }

Parameters

Examples

This example explains how to configure the tunneling t5. If the packet can pass the port, the packet does not need to be changed.

• The service and customer tag frame of the packet need not to be removed

 admin@XorPlus# set vlans dot1q-tunneling egress t5 then action none

• The outside service tag frame of the packet need to be removed

 admin@XorPlus# set vlans dot1q-tunneling egress t5 then action one

• The service and customer tag frame of the packet need to be removed

 admin@XorPlus# set vlans dot1q-tunneling egress t5 then action two

• The service tag frame of the packet need to be replaced by 200

admin@XorPlus# set vlans dot1q-tunneling egress t5 then action change
admin@XorPlus# set vlans dot1q-tunneling egress t5 then service-vlan 200
admin@XorPlus# commit