This section contains descriptions of the CoPP CLI commands.

Although the realization and commands of CoPP use the QoS module of CoS (Class of Service) and Firewall Filter Rule, but CoPP has its own command line with a fixed keyword copp, distinguishing it from the ACL feature.

run clear copp statistics
run show copp bandwidth
run show copp statistics
run show filter copp
run show interface stm
set class-of-service forwarding-class local-priority (CoPP)
set class-of-service scheduler max-bandwidth-pps
set class-of-service scheduler min-bandwidth-pps
set class-of-service scheduler-profile copp-profile forwarding-classs scheduler
set class-of-service scheduler weight (CoPP)
set firewall filter copp sequence from destination-address-ipv4
set firewall filter copp sequence from destination-address-ipv6
set firewall filter copp sequence from destination-mac-address
set firewall filter copp sequence from destination-port
set firewall filter copp sequence from ether-type
set firewall filter copp sequence from protocol
set firewall filter copp sequence from source-address-ipv4
set firewall filter copp sequence from source-address-ipv6
set firewall filter copp sequence from source-mac-address
set firewall filter copp sequence from source-port
set firewall filter copp sequence from vlan
set firewall filter copp sequence then dscp
set firewall filter copp sequence then forwarding-class

CoPP Commands