/
run show igmp interface

run show igmp interface

Owned by Tracy Yang
Nov 18, 2024

The run show igmp interface command displays information about IGMP interfaces.


Command Syntax
run show igmp interface [<interface-name>]


Parameter

ParameterDescription
<interface-name>Optional. Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name. The value is a string.



Example

  • Display the IGMP configuration and running information on VLAN771.
admin@XorPlus# run show igmp interface vlan771 
Interface : vlan2
State : up
Address : 5.5.5.5
Uptime : 00:00:10
Version : 3


Querier
-------
Querier : local
QuerierIp : 5.5.5.5 (this router)
Start Count : 0
Query Timer : 00:00:35
Other Timer : --:--:--


Timers
------
Group Membership Interval : 370s
Last Member Query Count : 2
Last Member Query Time : 2s
Older Host Present Interval : 370s
Other Querier Present Interval : 365s
Query Interval : 180s
Query Response Interval : 10s
Robustness Variable : 2
Startup Query Interval : 45s


Flags
-----
All Multicast : no
Broadcast : yes
Deleted : no
Interface Index : 94
Multicast : yes
Promiscuous : no
  • Display information about all IGMP interfaces.


admin@XorPlus# run show igmp interface
Interface         State          Address  V  Querier  Query Timer    Uptime
vlan2              up        10.10.60.10  2    local     00:00:40  02:13:12
vlan3              up        10.10.61.10  3    local     --:--:--  00:36:29

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.