set poe interface threshold-mode
This command is applied on AS4610-30P, AS4630-54PE, AS4625-54P, AS4630-54NPE, S5860-24MG-U, S5860-48XMG-U, S3410-24TS-P and S3410-48TS-P.
The set poe interface threshold-mode configures PoE threshold-mode on all the ports or a specific physical port.
Command Syntax
set poe interface {<port-id> | all} threshold-mode <value>
Parameter
Parameter | Description |
---|---|
interface {<port-id> | all} | Specifies interface ID. The value could be ge-1/1/1 to ge-1/1/48, all indicates a global configuration that set a same threshold mode on all ports. |
threshold-mode <value> | The value is an interger that ranges from 0 to 2. 0: None (max power 16.2W) (Default). This command configures the type of power limit on the specific port. For the class-based power threshold, the class max power values are as follows: Class 0: 16.2W Class 1: 4.2W Class 2: 7.4W Class 3: 15W Class 4: 30W Class 5: 45W Class 6: 60W Class 7: 75W Class 8: 90W |
Example
• This example is to configure threshold-mode 2 (user defined) on all the ports and ge-1/1/1.
admin@XorPlus# set poe interface all threshold-mode 2 admin@XorPlus# commit admin@XorPlus# set poe interface ge-1/1/1 threshold-mode 2 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.