set protocols ethernet-oam interface remote-loopback supported

Owned by Tracy Yang
Last updated: Feb 07, 2024
1 min read

The set protocols ethernet-oam interface remote-loopback supported command enables reactions to loopback control OAMPDUs from peers.

The delete protocols ethernet-oam interface remote-loopback supported command deletes the configuration.

NOTE:

The responding end has been configured with this command to enable reactions to loopback control OAMPDUs from peers, only after this can the peer end run the command ethernet-oam remote-loopback start interface <interface-name> to start the EFM OAM remote loopback tests.

Command Syntax

set protocols ethernet-oam interface <interface-name> remote-loopback supported

delete protocols ethernet-oam interface <interface-name> remote-loopback supported

 

Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name. The value could be a physical interface, for example, ge-1/1/1, xe-1/1/2, and so on.

 

Example

  • Enable reactions to loopback control OAMPDUs from peers.

admin@PICOS# set protocols ethernet-oam interface xe-1/1/2 remote-loopback supported admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.