run show ethernet-oam statistics

The run show ethernet-oam statistics command is used to view the interface statistics information of EFM OAMPDU packets.

 

Command Syntax

run show ethernet-oam statistics [interface <interface-name>]

 

Parameter

Parameter

Description

interface <interface-name>

Optional. Specifies an interface name that enabled EFM OAM. The value is a physical interface.

If not specified, statistics information of all the interfaces enabled EFM OAM will be displayed.

 

Example

  • View the statistics information of EFM OAMPDU packets.

admin@PICOS# run show ethernet-oam statistics interface ge-1/1/1 Packets statistics for interface ge-1/1/1 Packet type OAM Tx Count OAM Rx Count ----------------------------------------------------------------------------------------- OAMInformation 11365 11372 OAMLoopbackControl 0 1 OAMUnsupported 0 0

Copyright © 2024 Pica8 Inc. All Rights Reserved.