set protocols ethernet-oam interface mode

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set protocols ethernet-oam interface mode command configures the EFM OAM mode for the Ethernet port enabled EFM OAM function.

The delete protocols ethernet-oam interface mode command deletes the configuration.

 

Command Syntax

set protocols ethernet-oam interface <interface-name> mode <active | passive>

delete protocols ethernet-oam interface <interface-name> mode

 

Parameter

Parameter

Description

interface <interface-name>

Specifies an interface name. The value could be a physical interface.

mode <active | passive>

Specifies the EFM OAM mode. The value could be active or passive.

  • Active mode causes the port to initiate the negotiation process and continually send out EFM OAM information PDUs.

  • Passive mode waits for the peer to initiate the negotiation process. A passive mode port cannot initiate remote loopback activity with the peer.

By default, the EFM OAM mode is active.

 

Example

  • Configure the EFM OAM mode to passive for the Ethernet port enabled EFM OAM.

admin@PICOS# set protocols ethernet-oam interface te-1/1/19 mode passive admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.