/
protocols rip interface vif address passive
protocols rip interface vif address passive
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Dec 05, 2019
Loading data...
To prevent a interface IP address from sending RIP packets, use the set protocols rip interface vif address passive in L2/L3 configuration mode.
Command Syntax
set protocols rip interface interface-name vif vif-name address ip-address passive { true | false }
Parameters
| interface-name | Interface name. |
| vif-name | L3 interface name. |
| ip-address | Interface IP address used for RIP. |
Example
The following example prevents RIP packets from being sent:
admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 passive true
Copyright © 2025 Pica8 Inc. All Rights Reserved.