/
protocols ospf6 area <area-id> default-lsa metric

protocols ospf6 area <area-id> default-lsa metric

Owned by Tracy Yang (Unlicensed)
Dec 05, 2019

User can configure metric of default route of the switch interface.


Command Syntax
set protocols ospf6 area <area-id> default-lsa metric <uint>


Parameter
• <area-id>  The OSPF area to which the attached network belongs.
• <uint>  Metric of default route


Example
• This example configure the metric 6 of default route of the switch interface.

admin@XorPlus# set protocols ospf6 area 0.0.0.0 default-lsa metric 6
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.