VLAN Configuration Commands

This section contains descriptions of the CLI commands that this chapter references.

• vlan-interface interface <interface-name> router-advertisement disable
• vlan-interface interface vif address prefix-length
• vlan-interface interface vif description
• vlan-interface loopback address <ip-address> prefix-length
• vlans dot1q-tunneling egress from
• vlans dot1q-tunneling egress then action
• vlans dot1q-tunneling egress then service-vlan
• vlans dot1q-tunneling ingress from double-tag service-vlan
• vlans dot1q-tunneling ingress from one-tag customer-vlan-list
• vlans dot1q-tunneling ingress from untag enabled
• vlans dot1q-tunneling ingress then
• vlans vlan-id
• vlans vlan-id description
• vlans vlan-id l3-interface
• vlans vlan-id vlan-name
• show vlan-interface
• show vlan-interface interface
• show vlans
• run clear vlan-interface statistics loopback
• vlan-interface interface <interface-name> dhcp <boolean>
• set vlan-interface interface mtu
• set vlan-interface interface rate-limit
• set vlan-interface interface vrf
• set vlans vlan-id private-vlan mode
• set vlans vlan-id private-vlan association
• run show vlans private-vlan
• run show vlans private-vlan type