/
System Management Commands
System Management Commands
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Mar 16, 2021
Analytics
Loading data...
- NAC Configuration Commands
- set protocols dot1x aaa radius authentication server-ip
- set protocols dot1x aaa radius authentication server-ip priority
- set protocols dot1x aaa radius authentication server-ip retry-num
- set protocols dot1x aaa radius authentication server-ip retry-interval
- set protocols dot1x aaa radius authentication server-ip detect-interval
- set protocols dot1x interface auth-mode 802.1x
- set protocols dot1x interface auth-mode 802.1x fallback-to-web disable
- set protocols dot1x interface auth-mode mac-radius
- set protocols dot1x interface auth-mode web
- set protocols dot1x interface authentication-open disable
- set protocols dot1x aaa radius dynamic-author client
- set protocols dot1x aaa radius dynamic-author client shared-key
- set protocols dot1x aaa radius nas-ip
- set protocols dot1x aaa radius accounting disable
- set protocols dot1x interface host-mode
- set protocols dot1x block-vlan-id
- set protocols dot1x server-fail-vlan-id
- set protocols dot1x filter sequence from destination-mac-address
- set protocols dot1x filter sequence from destination-address-ipv4
- set protocols dot1x filter sequence from destination-address-ipv6
- set protocols dot1x filter sequence from destination-port
- set protocols dot1x filter sequence from ether-type
- set protocols dot1x filter sequence from source-address-ipv4
- set protocols dot1x filter sequence from source-address-ipv6
- set protocols dot1x filter sequence from source-port
- set protocols dot1x filter sequence from protocol
- set protocols dot1x filter sequence from vlan
- set protocols dot1x filter sequence then action
- run show dot1x all
- run show dot1x interface
- run show dot1x server
- run show dot1x dynamic filter
- run show dot1x downloadable filter
- run show dot1x interface statistics gigabit-ethernet
- set protocols dot1x server-fail recovery-method
- set protocols dot1x aaa radius authentication server-ip consecutive-detect-num
- set protocols dot1x aaa vrf
- set protocols dot1x interface session-timeout
- set protocols dot1x interface recovery-timeout
- set protocols dot1x server-fail recovery-timeout
- SNMP Configuration Commands
- protocols snmpv3 trap-group targets <IPv4> security-name <text>
- set protocols lldp snmp-trap
- set protocols snmp trap-group event cpu-threshold enable
- set protocols snmp trap-group event cpu-threshold high
- set protocols snmp trap-group event cpu-threshold interval
- set protocols snmp trap-group event cpu-threshold low
- set protocols snmp trap-group event mac-threshold enable
- set protocols snmp trap-group event mac-threshold interval
- set protocols snmp trap-group event mac-threshold limit
- set protocols snmp trap-group vrf
- protocols snmp trap-group version <version>
- protocols snmp v3 enable <boolean>
- protocols snmp v3 usm-user <text>
- protocols snmp v3 usm-user <text> group <text>
- protocols snmp v3 group <text> notify-view <text>
- protocols snmp v3 group <text> read-view <text>
- protocols snmp v3 group <text> write-view <text>
- protocols snmp v3 group group1 security-level
- protocols snmp v3 usm-user user1 authentication-mode <authentication-mode >
- protocols snmp v3 usm-user <text1> authentication-key <text2>
- protocols snmp v3 usm-user <text> privacy-mode <privacy-mode >
- protocols snmp v3 usm-user <text1> privacy-key <text2>
- protocols snmp v3 mib-view <text1> subtree <text2> mask <text3>
- protocols snmp v3 mib-view <text1> subtree <text2> type <type>
- set protocols snmp trap-group source-interface
- show system boot-messages
- show system connections
- show system core-dumps
- show system cpu-usage
- show system date
- show system fan
- show system memory-usage
- show system name
- show system ntp-status
- show system os
- show system processes brief
- show system processes detail
- show system rollback compare to
- show system rollback file
- show system rollback list
- show system rpsu
- show system serial-number
- show system temperature
- show system uptime
- show system users
- set system aaa local disable
- set system aaa radius accounting disable
- set system aaa radius accounting server-ip
- set system aaa radius accounting server-ip port
- set system aaa radius accounting server-ip shared-key
- set system aaa radius accounting server-ip timeout
- set system aaa radius authorization disable
- set system aaa radius authorization server-ip
- set system aaa radius authorization server-ip port
- set system aaa radius authorization server-ip shared-key
- set system aaa radius authorization server-ip timeout
- set system aaa radius vrf
- set system aaa tacacs-plus accounting
- set system aaa tacacs-plus authorization
- set system aaa tacacs-plus auth-type
- set system aaa tacacs-plus disable
- set system aaa tacacs-plus key
- set system aaa tacacs-plus port-number
- set system aaa tacacs-plus timeout
- set system aaa tacacs-plus server-ip
- set system aaa tacacs-plus source-interface
- set system aaa local-auth-fallback disable
- set system aaa tacacs-plus vrf
- system hostname
- set system inband enable
- set system inband vlan-interface
- system login-acl network
- system login announcement
- system login user
- system login user admin authentication plain-text-password
- system login user admin class
- system login user authentication plain-text-password
- system login user class
- system timezone
- set system ntp server-ip
- set system ntp source-interface
- set system ntp vrf
- set interface gigabit-ethernet ptp mode
- system remote-config allow-client
- system services ssh connection-limit
- system services ssh disable
- system services ssh protocol-version v2
- system services ssh rate-limit
- system services ssh root-login
- set system services ssh idle-timeout
- set system snmp-acl security-name network
- system syslog host
- set system syslog local-file
- system syslog port-number
- system syslog port-protocol
- set system syslog server-ip <IP> source-interface <text>
- set system syslog vrf
- set system usb disable
- set system management-ethernet eth0 ip-address {IPv4 | IPv6}
- set system management-ethernet eth0 ip-gateway {IPv4 | IPv6}
- set system management-ethernet eth1 ip-address {IPv4 | IPv6}
- set system management-ethernet eth1 ip-gateway {IPv4 | IPv6}
- show system management-ethernet
- run request system reboot
- run show system hwinfo
- ping
- ping6
- traceroute
- traceroute6
- tftp
- set protocols sflow collector vrf
- scp
- set system login banner
- upgrade2 image-file
- upgrade2 image-file backup-file
- upgrade2 image-file factory-default
- upgrade2 image-file use-prev-config
- set system dns-server-ip
- set system console idle-timeout
- set system dns-search-list
- set system login multiline-banner message
- set system login multiline-announcement message
, multiple selections available,
Related content
CoPP Commands
CoPP Commands
More like this
CoPP Commands
CoPP Commands
More like this
CoPP Commands
CoPP Commands
More like this
CoPP Commands
CoPP Commands
More like this
CoPP Commands
CoPP Commands
More like this
CoPP Commands
CoPP Commands
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.