Interface Configuration Commands

This section contains descriptions of the CLI commands that this chapter references.

• interface aggregate-balancing hash-mapping field ethernet-destination-address disable
• interface aggregate-balancing hash-mapping field ethernet-source-address disable
• interface aggregate-balancing hash-mapping field ethernet-type disable
• interface aggregate-balancing hash-mapping field ingress-interface disable
• interface aggregate-balancing hash-mapping field ip-destination disable
• interface aggregate-balancing hash-mapping field ip-protocol disable
• interface aggregate-balancing hash-mapping field ip-source disable
• interface aggregate-balancing hash-mapping field port-destination disable
• interface aggregate-balancing hash-mapping field port-source disable
• interface aggregate-balancing hash-mapping field vlan disable
• interface aggregate-ethernet <lag_name>
• interface aggregate-ethernet <lag_name> aggregated-ether-options flow-control
• interface aggregate-ethernet <lag_name> aggregated-ether-options lacp enable
• interface aggregate-ethernet <lag_name> aggregated-ether-options min-selected-port
• interface aggregate-ethernet <lag_name> backup-port delay
• interface aggregate-ethernet <lag_name> backup-port interface
• interface aggregate-ethernet <lag_name> backup-port mode
• interface aggregate-ethernet <lag_name> crossflow enable
• interface aggregate-ethernet <lag_name> crossflow local-control
• interface aggregate-ethernet <lag_name> description
• interface aggregate-ethernet <lag_name> disable
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling egress
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ether-type
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling ingress
• interface aggregate-ethernet <lag_name> family ethernet-switching dot1q-tunneling mode
• interface aggregate-ethernet <lag_name> family ethernet-switching native-vlan-id
• interface aggregate-ethernet <lag_name> family ethernet-switching port-mode
• interface aggregate-ethernet <lag_name> family ethernet-switching vlan members
• interface aggregate-ethernet <lag_name> hash-mapping mode
• interface aggregate-ethernet <lag_name> mtu
• interface aggregate-ethernet <lag_name> snmp-trap
• interface aggregate-ethernet <lag_name> static-ethernet-switching mac-address <macaddr> vlan
• interface aggregate-ethernet <lag_name> storm-control <mode> pps
• interface cut-through-mode
• interface ecmp hash-mapping field ingress-interface disable
• interface ecmp hash-mapping field ip-destination disable
• interface ecmp hash-mapping field ip-protocol disable
• interface ecmp hash-mapping field ip-source disable
• interface ecmp hash-mapping field port-destination disable
• interface ecmp hash-mapping field port-source disable
• interface ecmp hash-mapping field vlan disable
• interface ecmp max-path
• interface ethernet-switching-options buffer queue-limit
• interface ethernet-switching-options mac-table-aging-time
• interface gigabit-ethernet <port> backup-port delay
• interface gigabit-ethernet <port> backup-port interface
• interface gigabit-ethernet <port> backup-port mode
• interface gigabit-ethernet <port> crossflow enable
• interface gigabit-ethernet <port> crossflow local-control
• interface gigabit-ethernet <port> description
• interface gigabit-ethernet <port> disable
• interface gigabit-ethernet <port> ether-options 802.3ad
• interface gigabit-ethernet <port> ether-options flow-control
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling egress
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ether-type
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling ingress
• interface gigabit-ethernet <port> family ethernet-switching dot1q-tunneling mode
• interface gigabit-ethernet <port> family ethernet-switching native-vlan-id
• interface gigabit-ethernet <port> family ethernet-switching vlan members
• interface gigabit-ethernet <port> family ethernet-switching vlan members <vlan-id> untagged
• interface gigabit-ethernet <port> fec <boolen>
• interface gigabit-ethernet <port> link-fault-signaling ignore-local-fault <boolean>
• interface gigabit-ethernet <port> link-fault-signaling ignore-remote-fault <boolean>
• interface gigabit-ethernet <port> mac-learning <boolean>
• interface gigabit-ethernet <port> mtu
• interface gigabit-ethernet <port> power-preemphasis-level
• interface gigabit-ethernet <port> snmp-trap
• interface gigabit-ethernet <port> static-ethernet-switching mac-address <mac-address> vlan <vlan-id>
• interface gigabit-ethernet <port> storm-control <mode> kbps
• interface gigabit-ethernet <port> storm-control <mode> pps
• interface gigabit-ethernet <port> storm-control <mode> ratio <value>
• interface gigabit-ethernet <port> up-mode <boolean>
• interface gigabit-ethernet <port> wred queue <value> drop_probability
• interface gigabit-ethernet <port> wred queue <value> ecn_thresh
• interface gigabit-ethernet <port> wred queue <value> enable
• interface gigabit-ethernet <port> wred queue <value> max_thresh
• interface gigabit-ethernet <port> wred queue <value> min_thresh
• interface max-acl-rule-limit <egress/ingress>
• interface max-route-limit
• Port Security Commands
  • run clear port-security dynamic address
  • run clear port-security dynamic interface
  • run clear port-security port-error
  • run clear port-security sticky address
  • run clear port-security sticky interface
  • run show port-security address
  • run show port-security brief
  • run show port-security interface
  • set interface ethernet-switching-options port-error-discard timeout
  • set interface gigabit-ethernet port-security block
  • set interface gigabit-ethernet port-security mac-address vlan
  • set interface gigabit-ethernet port-security mac-limit
  • set interface gigabit-ethernet port-security sticky
  • set interface gigabit-ethernet port-security violation
• run show interface diagnostics tdr
• set interface bpdu-tunneling destination-mac
• set interface ethernet-switching-options analyzer input
• set interface ethernet-switching-options analyzer output
• set interface gigabit-ethernet auto-speeds
• set interface gigabit-ethernet breakout
• set interface gigabit-ethernet cdr
• set interface gigabit-ethernet duplex auto
• set interface gigabit-ethernet family ethernet-switching bpdu-tunneling protocol
• set interface gigabit-ethernet family ethernet-switching port-mode
• set interface gigabit-ethernet speed
• show interface aggregate-ethernet <lag_name>
• show interface aggregate-ethernet <lag_name> dot1q-tunneling
• show interface bpdu-tunneling
• show interface brief
• show interface detail
• show interface diagnostics optics all
• show interface ecmp max-path
• show interface flexlink
• show interface gigabit-ethernet <interface>