/
protocols bfd interface <interface> detect-multiplier

protocols bfd interface <interface> detect-multiplier

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

Users can configure detect-multiplier.


Command Syntax
set protocols bfd interface <interface> detect-multiplier <value>
delete protocols bfd interface <interface> detect-multiplier


Parameter
•<interface>The vlan interface, e.g. vlan20
•<value> Detection time multiplier,[3..100]


Example
• This example configures bfd detect-multiplier for vlan4:

admin@XorPlus# set protocols bfd interface vlan4 detect-multiplier 5
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.