set interface gigabit-ethernet voice-vlan tagged mode
The set interface gigabit-ethernet voice-vlan tagged mode command configures the tagged mode for the outgoing packet of a voice VLAN interface.
Command Syntax
set interface gigabit-ethernet <interface-name> voice-vlan tagged mode <tag | untag | auto>
Parameter
Parameter | Description |
gigabit-ethernet <interface-name> | Specifies the physical port of the switch. |
tagged mode <tag | untag | auto> | Configure the tagged mode for the outgoing packet of a voice VLAN interface. The value could be tag, untag or auto.
The value auto is the default and recommended value. |
Usage Guidelines
    For tagged mode auto,
- Â If the packet matches the user defined OUI addresses or the OUI addresses learned from CDP and LLDP protocols, the outgoing packet from a voice VLAN interface will be untagged when the tagged mode is auto.
- Â If the packet matches the OUI addresses learned from LLDP-MED protocol, the outgoing packet of a voice VLAN interface will be tagged with the voice VLAN ID based on the result of the LLDP-MED protocol negotiation between the switch and the IP phone when the tagged mode is auto.
- If the negotiation result of LLDP-MED protocol between the switch and the IP phone is SUCCESS, the outgoing packet of a voice VLAN interface will be tagged with the voice VLAN ID.
- Else if the negotiation result of LLDP-MED protocol between the switch and the IP phone is FAILURE, the outgoing packet of a voice VLAN interface will be untagged.
Example
- Â Configure the outgoing packet of a voice VLAN interface ge-1/1/1 be tagged with the voice VLAN ID.Â
admin@Xorplus# set interface gigabit-ethernet ge-1/1/1 voice-vlan tagged mode tag admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.