show vlans voice-vlan vlan-id <text>
Show special voice vlan id detail information.
Command Syntax
show vlans voice-vlan vlan-id <text>
Parameter
•<text> voice-vlan id, can't be the same with pvid or vlan-member
Example
• This example is to show voice-vlan detail information::
1.ge-1/1/1 is in suto mode and aging. admin@XorPlus# run show vlans voice-vlan vlan-id 10 Voice Vlan ID:10 Voice Vlan local priority:6 Voice Vlan dscp:46 Voice Vlan aging time:1440 minutes Current voice vlan enabled port mode: Port Mode Tagged Mac_Address Status -------------------------------------------------------------------- ge-1/1/1 auto false Aging:86143sec 2.ge-1/1/2 is in auto mode and working. admin@XorPlus# run show vlans voice-vlan vlan-id 20 Voice Vlan ID:20 Voice Vlan local priority:6 Voice Vlan dscp:46 Voice Vlan aging time:1440 minutes Current voice vlan enabled port mode: Port Mode Tagged Mac_Address Status -------------------------------------------------------------------- ge-1/1/2 auto false 0:1:e3:0:0:0 Working 3.ge-1/1/3 is in auto mode and not working. admin@XorPlus# run show vlans voice-vlan vlan-id 30 Voice Vlan ID:30 Voice Vlan local priority:6 Voice Vlan dscp:46 Voice Vlan aging time:1440 minutes Current voice vlan enabled port mode: Port Mode Tagged Mac_Address Status -------------------------------------------------------------------- ge-1/1/3 auto false Idle 4.ge-1/1/4 is in manual mode. It can't display any mac-addresses and status will always be working in this mode. admin@XorPlus# run show vlans voice-vlan vlan-id 40 Voice Vlan ID:40 Voice Vlan local priority:6 Voice Vlan dscp:46 Voice Vlan aging time:1440 minutes Current voice vlan enabled port mode: Port Mode Tagged Mac_Address Status -------------------------------------------------------------------- ge-1/1/4 manual false Working
Copyright © 2024 Pica8 Inc. All Rights Reserved.