PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.0_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4.0
Hardware Guides
•
AmpCon Network Controller Deployment and User Guide
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
•
class-of-service classifier <classifier-name>
•
class-of-service classifier <classifier-name> forwarding-class <forwarding-class-name> code-point <code-point>
•
class-of-service classifier <classifier-name> trust-mode <trust-mode>
•
class-of-service forwarding-class <forwarding-class-name> local-priority <local-priority>
•
class-of-service interface <port> classifier <classifier-name>
•
class-of-service scheduler <scheduler-name> guaranteed-rate <guaranteed-rate>
•
class-of-service scheduler <scheduler-name> mode SP
•
class-of-service scheduler <scheduler-name> mode WFQ
•
class-of-service scheduler <scheduler-name> mode WRR
•
class-of-service scheduler <scheduler-name> weight <weight-id>
•
class-of-service scheduler-profile <scheduler-profile-name> forwarding-class <forwarding-class-name> schedule <schedule-name>
•
show class-of-service <text>
•
set class-of-service interface scheduler-profile
•
class-of-service interface <port> default-priority <default-priority-type> <default-priority-int>
•
class-of-service pfc-profile <profile-name> code-point <code-point> drop <boolean>
•
class-of-service interface <port> pfc-profile <profile-name>
•
set firewall filter sequence then dscp
•
set class-of-service scheduler max-rate
CoPP Commands
Buffer Management Commands
Interface-based Rate Limiting Commands
ACL-based Traffic Policer Commands
•
set firewall policer if-exceeding count-mode
•
set firewall policer if-exceeding rate-limit
•
set firewall policer if-exceeding burst-limit
•
set firewall filter sequence then policer
•
set firewall policer if-exceeding action discard
•
run show policer
Layer 3 Routing Commands
IP Multicast Commands
Protocol Configuration Commands
•
OpenFlow Commands in CrossFlow Mode
VLAN Configuration Commands
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
MVRP Commands
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
PICOS-4.4.0_Configuration_Guide
/
/
QoS Configuration Commands
/
ACL-based Traffic Policer Commands
Summarize
ACL-based Traffic Policer Commands
Tracy Yang (Unlicensed)
Owned by
Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read
Loading data...
set firewall policer if-exceeding count-mode
set firewall policer if-exceeding rate-limit
set firewall policer if-exceeding burst-limit
set firewall filter sequence then policer
set firewall policer if-exceeding action discard
run show policer
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 11, "requestCorrelationId": "2a6afa0982b5412c8dd4cfa7d3b7e272"}