PICOS Documentation
Spaces
Apps
Templates
Create
PICOS-4.4.0_Configuration_Guide
All content
Space settings
Content
Results will update as you type.
•
Release Notes for PICOS 4.4.0
Hardware Guides
•
AmpCon Network Controller Deployment and User Guide
PICOS System Configuration Guide
PICOS Routing and Switching Configuration Guide
PICOS Routing and Switching Command Reference
Command-Line Interface Commands
System Management Commands
Interface Configuration Commands
Voice VLAN Configuration Commands
ACL Configuration Commands
QoS Configuration Commands
Layer 3 Routing Commands
IP Multicast Commands
Protocol Configuration Commands
•
OpenFlow Commands in CrossFlow Mode
VLAN Configuration Commands
VXLAN Commands
BGP EVPN Commands
PoE Configuration Commands
VRRP Commands
Spanning Tree Protocol Commands
MLAG Commands
GRE Tunnel Interface Commands
•
run show l3-interface tunnel
•
set l3-interface tunnel address
•
set l3-interface tunnel destination
•
set l3-interface tunnel disable
•
set l3-interface tunnel source
•
set l3-interface tunnel tunnel-mode gre-ip
•
set l3-interface tunnel vrf
MVRP Commands
PICOS Open vSwitch Configuration Guide
PICOS Open vSwitch Command Reference
Troubleshooting Guide
Blogs
PICOS-4.4.0_Configuration_Guide
/
/
PICOS Routing and Switching Command Reference
/
GRE Tunnel Interface Commands
Summarize
GRE Tunnel Interface Commands
Tracy Yang (Unlicensed)
Owned by
Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read
Loading data...
set l3-interface tunnel disable
set l3-interface tunnel vrf
set l3-interface tunnel tunnel-mode gre-ip
set l3-interface tunnel destination
run show l3-interface tunnel
set l3-interface tunnel address
set l3-interface tunnel source
Copyright © 2024 Pica8 Inc. All Rights Reserved.
{"serverDuration": 11, "requestCorrelationId": "beb91f74597c4a87ac393c11bd891de3"}