run show vrf
The run show vrf command is used to view the binding information between the VRFs and the Layer 3 interfaces.
Command Syntax
run show vrf
Parameter
None.
Example
• View the binding information between the VRFs and the Layer 3 interfaces.Â
admin@Xorplus# run show vrf Vrf         Description      Interfaces ----------  ---------------  ------------------------- vrf1                     vlan1,vlan2 vrf10                    vlan19,vlan20 vrf100                    vlan199,vlan200 vrf101                    vlan201,vlan202 vrf200 r1.1,r2
Copyright © 2024 Pica8 Inc. All Rights Reserved.